Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

2.Install: Camshaft Camshaft sprocket ***************************************************** Installation steps: Turn the crankshaft counterclockwise with a wrench. Align the “I” mark 1 on the rotor with the sta- tionary pointer 2 on the crankcase cover. When the “I” mark is aligned with the station- ary pointer, the piston is at the Top Dead Center (T.D.C.). CAUTION: Do not turn the crankshaft during the cam- shaft installation. Temporarily install the camshaft sprocket on the camshaft. (Do not install the bolts.) Then, install the timing chain on the camshaft sprocket. NOTE: Make sure the small holes 3 on the camshaft face upward.

Align the notches 4 on the decompressor cams with the projections 5 on the decom- pressor spring lever, then install the cam- shaft sprocket on the camshaft. NOTE: Check that each part is positioned as shown in the illustration. 6 Small holes on camshaft sprocket 7 Punch mark on decompressor spring lever 8 Top front of cylinder head 4 - 22 CAMSHAFT AND CYLINDER HEAD ENG