MIDDLE GEAR 6) Round off hundredths digit and select appropriate shim(s). In the example above, the calculated shim thickness is 0.64 mm. The chart instructs you, however, to round off 4 to 5. Shims are supplied in the following thickness. ***************************************************** INSTALLING THE MIDDLE DRIVEN SHAFT 1.Install: Bearing retainer 1 LT Attach the ring nut wrench 2 . CAUTION: The middle driven shaft bearing retainer has left-handed threads. To tighten the retainer turn it counterclockwise. 4 - 94 ENG Hundredths Round value 0, 1, 2 0 3, 4, 5, 6, 7 5 8, 9 10 Middle drive pinion gear shim Thickness (mm) 0.10 0.40 0.15 0.50 0.20 0.60 0.30 R. T.
80 Nm (8.0 m • kg, 58 ft • lb) NOTE: Ring nut wrench: P/N. YM-38404, 90890-01430