Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

MIDDLE GEAR 2.Install: Bearing retainer 1 LT ***************************************************** Installation steps: Attach the folded rag 2 . Secure the bearing housing edge in the vise. Attach the bearing retainer wrench 3 . Tighten the bearing retainer. CAUTION: The middle driven shaft bearing retainer has left-handed threads. To tighten the retainer turn it counterclockwise. ***************************************************** 3.Install: Shims 1 Bearing housing NOTE: Install the shims so that the tabs are positioned as shown in the illustration. 4.Install: Universal joint yoke (rear side) Washer Use the universal joint holder 2 to hold the yoke. 4 - 95 ENG Bearing retainer wrench:

P/N. YM-04128, 90890-04128 R. T. Bearing retainer: 110 Nm (11.0 m • kg, 80 ft • lb) Nut 1 ● LT R. T. 97 Nm (9.7 m • kg, 70 ft • lb) NOTE: Universal joint holder: P/N. YM-04062, 90890-04062