Yamaha Grizzly 660 — Yamaha Grizzly 660 User Manual

IGNITION SYSTEM 5.Spark plug cap resistance Remove the spark plug cap. Connect the pocket tester ( ΩЧ 1k) to the spark plug cap. * 9 - 11 ELEC – + Spark plug gap: 0.8 ~ 0.9 mm (0.03 ~ 0.04 in) INCORRECT CORRECT 4.Ignition spark gap MEETS SPECIFICATION Disconnect the spark plug cap from the ● spark plug. Connect the dynamic spark tester 1 as ● shown. 2 Spark plug cap 3 Spark plug Turn the main switch to “ON”. ● Check the ignition spark gap. ● Crank the engine by pushing the starter ● switch, and increase the spark gap until a misfiring occurs. Minimum spark gap: 6.0 mm (0.24 in) OUT OF SPECIFICATION OR NO SPARK Check that the spark plug cap has the ● specified resistance.

OUT OF SPECIFICATION MEETS SPECIFICATION