Kubota — Lifting Rod - right

3-POINT HITCH & DRAWBAR 40 B Drawbar Remove the drawbar if a close mounted implement is attached. B Lifting Rod (Right) 2 . Attaching and detaching implements To avoid personal injury or death: A Do not extend lifting rod beyond the groove on the thread rod. To avoid personal injury or death: A Be sure to stop the engine. A Do not stand between tractor and implement unless parking brake is applied. A Before attaching or detaching implement, locate the tractor and implement on a firm level surface. A Whenever an implement or other attachment is connected to the tractor 3-point hitch, check full range of operation for interference, binding or PTO separation.

A Do not exceed maximum allowable length of either lifting rod, or the lifting rod will come apart and the 3-point equipment may fall. 1. To adjust the length of the lifting rod, lift the adjusting handle and turn to desired length. 2. After adjusting, the lifting rod adjusting handle must be returned and stored in the fore and aft position. 3. When extending the rod using adjusting handle, do not exceed the groove on the rod thread. B Lifting Rod (Left) By turning the rod itself, the lifting rod varies its length. When extending the rod, do not exceed the groove on the rod thread.

(1) Lifting rod (2) Adjusting handle (A) "GROOVE" (1) Lifting rod (A) "GROOVE" (1) Adjusting handle (2) Lock pin (A) "LOCK POSITION" (B) "UNLOCK POSITION"