STRUCTURE AND FUNCTION STEERING VALVE CONNECTION BETWEEN HAND PUMP AND SLEEVE ! The diagrams above show the connections with the sleeve ports used to connect the suction and discharge ports of the Girotor. If the steering wheel has been turned to the right, ports a, c, e, 9, i and k are connected by the vertical grooves in the spool to the pump side. At the same time, ports b, d, f, h, j, and I are connected to the head end of the left steering cylinder in the same way. ! n the condition in Fig. 1, ports 1 , 2, and 3 are the discharge ports of the Girotor set. They are connected to ports l , b, and d, so the oil is sent to the cylinder.
Ports 5, 6, and 7 are connected and the oil flows in from the pump. If the steering wheel is turned 90 E ', the condition changes to the condition shown in Fig. 2. In this case, ports 1 , 2, and 3 are the suction ports, and are connected to ports i , k, and c. Ports 5, 6, and 7 are the discharge ports, and are connected to ports d, f, and h. 10-68