STRUCTURE AND FUNCTION MAIN CONTROL VALVE SAFETY VALVE (WITH SUCTION) 1. Suction valve 2. Main valve 3. Main valve spring 4. Pilot piston 5. Suction valve spring 6. Valve body 7. Spacer Function ! The safety valve is in the bucket cylinder circuit inside the main control valve. If any abnormal pressure is generated by any shock to the cylinder when the main control valve is at the neutral position, this valve relieves the abnormal pressure to prevent damage to the cylinder. Operation Operation as safety valve ! Port A is connected to the cylinder circuit and port B is connected to the drain circuit. The oil pressure at port A is sent to port D from the hole in pilot piston (4).
It is also sent to port C by the orifice formed from main valve (2) and pilot piston (4). Pilot piston (4) is secured to the safety valve, and the size of the cross-sectional surface (cross-sectional area) has the following relationship: d2 > d1 > d3 > d4 . ! If abnormal pressure is created at port A, suction valve (1) is not actuated because of relationship d2 > d1>, but relationship between port A and port C is d3 > d4 , so main valve (2) receives oil pressure equivalent to the difference between the areas of d3 and d4 . If the oil pressure reaches the force (set pressure) of main valve spring (3), main valve (2) is actuated, and the oil from port A flows to port B. 10-93