STRUCTURE AND FUNCTION MAIN CONTROL VALVE Operation as suction valve ! If any negative pressure is generated at port A, port D is connected with port A, so there is also negative pressure at port D. The tank pressure of port B is applied to port E, so the suction valve (1) receives oil pressure a, which is equal to the difference in the area of d2 and d1 because of the tank pressure at port E. Therefore, oil pressure e moves the valve in the direction of opening, and oil pressure a acts to move suction valve (1) in the direction of closing. When the pressure at port A drops (and comes close to negative pressure), it becomes lower than hydraulic pressure e.
The relationship becomes oil pressure e > oil pressure a + force of valve spring (5), and suction valve (1) opens to let the oil from port B flow into port A and prevent any negative pressure from forming at port A. SUCTION VALVE 1. Main poppet 2. Sleeve 3. Spring Function ! This valve acts to prevent any negative pressure from forming in the circuit. Operation ! If any negative pressure is generated at port A (boom cylinder rod end) (when a pressure lower than tank circuit port B is generated), main poppet (1) is opened because of the difference in area between d1 and d2, and oil flows from port B at the tank end to port A at the cylinder port end. 10-94