Komatsu — SAFETY VALVE (WITH SUCTION)

STRUCTURE AND FUNCTION MAIN CONTROL VALVE Bucket spool at TILT BACK position Operation ! When the work equipment control lever is pulled, bucket spool (3) is pulled out to the TILT BACK position. ! The bypass circuit is closed by the spool, so the oil from port A pushes open check valve (7). The oil from port G then flows to the bottom end of the cylinder. ! At the same time, the oil at the cylinder rod end flows from port H to drain port C, and returns to the tank. As a result, the bucket is tilted back. 10-99