Komatsu — MEASURING BRAKE PERFORMANCE

TESTING AND ADJUSTING MEASURING BRAKE PEDAL PERFORMANCE M E A S U R I N G B R A K E PERFORMANCE i Measurement conditions C Road surface: Flat, horizontal, dry paved surface C Travel speed: 20 km/h when brakes are applied C Delay in applying brakes: 0.1 sec C Tire inflation pressure: Specified pressure Measurement method 1 . Start the engine and move the machine. 2 . Set the speed lever to the highest speed position and drive the machine. 3 . When the travel speed reaches 20 km/h, depress the left brake pedal with the specified operating force.

i Before carrying out this operation, determine the run-up path and the point for applying the brakes, then apply the brakes when the machine reaches that point. 4 . Measure the distance from the point where the brakes were applied to the point where the machine stopped. i Repeat this measurement three times and take the average. 20-34