TESTING AND ADJUSTING MEASURING WEAR OF BRAKE DISC MEASURING WEAR OF BRAKE DISC i Measurement conditions C Engine water temperature: Within green range on engine water temperature gauge Apply the parking brake and chocks under the tires. Measuring 1 . Loosen drain plug (1) and drain the axle oil. Axle oil: 17 R 2 . Remove measurement plug (2). 3 . Lightly press the brake pedal. i Check that plate (3)and plate (5) are pressed tightly against the disc. 4 . Insert tool O between disc (4) and plate (3), and measure the clearance. 5 . Tighten the drain plug and add axle oil through the oil filter to the specified level. Axle oil: 17 R 20-36