TESTING AND ADJUSTING MEASURING STROKE OF WORK EQUIPMENT VALVE SPOOL MEASURING STROKE OF WORK EQUIPMENT VALVE SPOOL i Measurement conditions C Engine water temperature: Within white range on engine water temperature gauge C Hydraulic oil temperature: 45 - 55 E C (113 - 131 E F) C Engine speed: Stopped Stop the machine on level ground, install the safety bar to the frame, lower the bucket to the ground, stop the engine, then apply the parking brake andput blocks under the wheels. Measuring 1. Adjusting stroke of valve spool 1) Measure the stroke of the spool of main control valve (1) from under the front frame.
2) Measure the stroke of the valve spool (2) when work equipment control lever (3) is moved to each position. i Carry out the measurement with two workers and give signals while carrying out the operation. i One worker operates the control lever, and the other worker measures the stroke. 20-45