Komatsu — 1. PRECAUTIONS WHEN HANDLING ELECTRIC EQUIPMENT

TROUBLESHOOTING PRECAUTIONS WHEN CARRYING OUT MAINTENANCE 3) Removing, installing, and drying connectors and wiring harnesses. a) DISCONNECTING CONNECTORS (1) Hold the connectors when disconnecting. When disconnecting the connectors, hold the connectors and not the wires. For connectors held by a screw, loosen the screw fully, then hold the male and female connectors in each hand and pull apart. For connectors which have a lock stopper, press down the stopper with your thumb and pull the connectors apart. (2) When removing the connectors from the clips, pull the connector in a parallel direction to the clip.

i If the connector is twisted to the left and right or up and down, the housing may break. (3) When disconnecting male and female connectors, release the lock and pull in parallel with both hands. i Never try to pull apart with one hand. 20-107 WA250-3L