Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY TORQUE CONVERTER, TRANSMISSION 18. Torque converter, transmission 1) Remove mounting bracket of engine stop motor (90) from engine flywheel housing, and move towards engine. 2) Set block between engine and axle housing and adjust height. 3) Using eye bolts, sling torque converter and transmission, then remove bracket mounting bolts (91) and (92). 4) Remove mounting bolts connecting to engine, and lift off torque converter and transmission (93). Ъ Be careful of the mating of the pilot cover and lift off slowly. Ъ Check that there is no interference between the piping and any other parts before lifting off. Torque converter, transmission: 557 kg 30-38 WA250-3L