Komatsu — INSTALLATION

DISASSEMBLY AND ASSEMBLY TORQUE CONVERTER, TRANSMISSION INSTALLATION ! Carry out installation in the reverse order of removal. Ъ Determine the position, then tighten fully. Hose mouthpiece nut (16 mm): 13.2 ± 1.5 Nm (1.35 ± 0.15 kgm) Hose mouthpiece nut (22 mm): 22.1 ± 2.6 Nm (2.25 ± 0.25 kgm) Hose mouthpiece nut (16 mm): 13.2 ± 1.5 Nm (1.35 ± 0.15 kgm) Hose mouthpiece nut (24 mm): 31.9 ± 2.6 Nm (3.25 ± 0.25 kgm) Ъ For details of the procedure for adjusting the cable length, see TESTING AND ADJUSTING. Cable joint nut: 13.7 ± 1 Nm (1.4 ± 0.1 kgm) Ъ Adjust the work equipment lever. For details, see TESTING AND ADJUSTING, Measuring, adjusting work equipment lever.

Ъ If the operation of the brake is poor, carry out adjustment. For details, see TESTING AND ADJUSTING. Ъ Apply the connector lock securely. Floor mount bolt: 279.5 ± 29.4 Nm (28.5 ± 3.0 kgm) Ъ Be careful to connect the coupling facing in the correct direction. Mounting bolt: 66.2 ± 7.4 Nm (6.75 ± 0.75 kgm) Mouthpiece nut: 196.1 ± 49 Nm (20.0 ± 5.0 kgm) (Width across flats: 41 mm) Ъ Check that there is an O-ring fitted in the mating surface of the housing, and be careful not to get it caught. 30-39 WA250-3L