Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY TRANSMISSION Ъ When the rotating torque is within the standard value, check that the end play is “0". Ъ Leave the guide pin as it is. 4) Assemble O-rings (46) and (46-1) to space (35), and install to front housing (44). Ъ Coat the outside circumference of O-ring thinly with grease. Outside circumference of O-ring: 5) Align with guide pin (44-1) of front housing (44), assemble selected shim (45) and O-ring (47), raise parking brake retainer assembly (33), then assemble to housing mount portion. Ъ Assemble the thinnest shim on the inside and the thickest shim on the outside. Ъ Coat the outside circumference of the parking brake retainer assembly with grease.

Outside circumference of O-ring: Grease (G2-LI) Mounting bolt: 110.3 ± 12.3 Nm (11.25 ± 1.25 kgm) 6) Align with parking brake disc spline and assemble hub spline (37-2) to output shaft (37). Ъ Align the spline of the disc with a screw driver. Ъ If the spline cannot be aligned, rotate lightly while assembling. Never use force to push it in. 30-57 WA250-3L