DISASSEMBLY AND ASSEMBLY TRANSMISSION 2) Press fit idler gear (24-1) completely, and lock with snap ring (23). 8. 2nd and 4th, 1st and 3rd clutches 1) Using tool A2, insert 2nd and 4th clutch (24) in housing and move towards output shaft end. 2) Using tool A2, assemble 1st and 3rd clutch (22) to housing. Ъ Do not fit the bearing at the bottom of the clutch completely. 3) When 1st gear (51) passes 2nd and 4th clutch gear (52), insert bearing of 2nd and 4th clutch into housing. 30-60 WA250-3L