DISASSEMBLY AND ASSEMBLY TRANSMISSION 4) Assemble O-ring to accumulator valve (7), and install to transmission. Ъ Wash and remove all oil and grease from the mounting bolt holes and mounting bolts. Mounting bolt: Thread tightener (LT-2) Mounting bolt: 34.3 ± 4.9 Nm (3.5± 0.5 kgm) 5) Sling transmission assembly (53) and lift off from assembly stand. Ъ When standing the transmission assembly up, be careful of the center of gravity, and lift off slowly. 15. Charging pump Assemble O-ring to charging pump (6-1) and install to transmission. Ъ Be careful not to get the O-ring caught. Mounting bolt: 112.8 ± 9.8 Nm (11.5 ± 1.0 kgm) 16. Oil filter 1) Install oil filter bracket (5). Mounting bolt:
112.8 ± 9.8 Nm (11.5 ± 1.0 kgm) 2) Assemble O-ring and install oil filler (6). Ъ Be careful not to get the O-ring caught. Ъ Assemble so that the front coupling and rear coupling face in same direction. 30-65 WA250-3L