Komatsu — DISASSEMBLY OF FR CLUTCH PACK

DISASSEMBLY AND ASSEMBLY TRANSMISSION TRANSMISSION CLUTCH PACK DISASSEMBLY Disassembly of FR clutch pack WARNING! The clutch pack is oily, so be careful not to let it slip when setting the clutch pack on the stand. Be careful also not to get your fingers caught between the stand and the clutch pack. Ъ Set on tool B1 with the FORWARD clutch side at the top. 1 . Bearing Using puller, remove bearing (1). 2. Spacer, FORWARD gear Remove spacer (2), thrust washer (3), needle bearing (4), FORWARD gear (5), and thrust washer (6). 3. End plate 1) Install tools B3 and B5, then tighten tool B4 and remove ring (7). Ъ After removing the ring, remove tool B3. 2) Remove end plate (8). 30-67 WA250-3L