Komatsu — DISASSEMBLY OF 2ND AND 4TH CLUTCH PACK

DISASSEMBLY AND ASSEMBLY TRANSMISSION Disassembly of 2nd and 4th clutch pack Ъ Set on tool B1 with the 4th clutch side at the top. 1) Idler Gear Fit puller to idler gear (39) and remove bearing (40) together with idler gear. 2. 4th gear Remove thrust washer (41), 4th gear (42), and needle bearing (43) 3. End plate 1) Install tools B3 and B5 and tighten tool B4, then remove ring (44). Ъ After removing the ring, remove tool B3. 2) Remove end plate (45). 30-71 WA250-3L