DISASSEMBLY AND ASSEMBLY TRANSMISSION not to get your fingers caught between the stand and clutch pack. 2) In the same way as with REVERSE piston, make sure that piston seal fits well before assembling it to piston (12). 3) Assemble piston (12) in the same way as REVERSE piston. Sliding surface of piston seal: Transmission oil 12. Clutch plate Insert tool B2 in housing and assemble plate (9),disc (10), and spring (11) in turn. Ъ Assemble in the same way as for the REVERSE clutch plate. 13. End plate 1) Install tools B3 and B5, then tighten tool B4 to push in end plate (8) 2) Assemble ring (7) and remove tool B3. Ъ Assemble in the same way as for the REVERSE end plate. 14.
Thrust washer Install thrust washer (6). 15. FORWARD gear Assemble FORWARD gear (5) Ъ Assemble in the same way as for the REVERSE gear. 16. Needle bearing Assemble needle bearing (4). 30-75 WA250-3L