DISASSEMBLY AND ASSEMBLY TRANSMISSION 9. 4th piston 1 ) Turn over clutch pack. WARNING! When turning over the clutch pack, be careful not to get your fingers caught between the stand and clutch pack. 2) In the same way as with 1st piston, make sure that piston seal fits well before assembling it to piston (49). 3) Assemble piston (49) in the same way as 2nd piston. Sliding surface of piston seal: Transmission oil 10. Clutch plate Assemble plate (46), disc (47), and spring (48) in turn to housing. Ъ Assemble in the same way as for the 2nd clutch plate. 11. End plate 1) Install tools B3 and B5, then tighten tool B4 to push in end plate (45). 2) Assemble ring (44) and remove tool B3.
Ъ Assemble in the same way as for the 2nd end plate. 3) Assemble thrust washer (41). 30-83 WA250-3L