DISASSEMBLY AND ASSEMBLY PARKING BRAKE ASSEMBLY PARKING BRAKE ASSEMBLY DISASSEMBLY 1. Brake housing and 1) Remove mounting bolts (2) from brake assembly (1). Ъ Do not remove the 2 lock set bolts (49) installed when removing the parking assembly. 2) Using forcing screws (3), divide into housing (4) and retainer (5). 2. Hub spline Set retainer (5) to tool C1, then pull out hub spline (6) and remove. Ъ Pull the hub spline straight up to remove. 3. Separator plate 1) Set spacer on top surface of separator plate (7), install tools C2, C3 and C4, then tighten C3, and remove ring (8). Ъ After removing the ring, remove tools C2, C3, C4, and spacer. 30-85 WA250-3L