DISASSEMBLY AND ASSEMBLY PARKING BRAKE ASSEMBLY 2) Remove separator plate (7), wave spring (9),and disc (10). 4. End plate Remove end plate (11). 5. Retainer Turn over retainer (5), and remove bearing cup (12) with puller. 6. Housing Remove 2 lock set bolts (13), then remove piston (14) and ball (15). Ъ If it is necessary to disassemble the lever portion, remove lock bolt (17), check the match marks on inner lever (18) and outer lever (19), then pull out the inner lever, and remove bearing (20) and oil seal (21). 30-86 WA250-3L