Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY PARKING BRAKE ASSEMBLY 6) Assemble ball (15) in groove of housing (4), install piston (14) from above, then tighten lock set bolt (13) temporarily. Ъ Temporarily assemble the two set bolts to prevent the piston from falling out during assembly. Ъ Set bolt length: 8 mm, R = 30 mm 2. Retainer Press fit bearing cup (12) to retainer (5). Ъ After press fitting the cup, check that there is no clearance at portion "a". 3. End plate Assemble end plate (11). 4. Separator plate 1) Assemble separator plate (7), wave spring (9), and disc (10) in turn. Ъ Soak disc (10) in clean transmission oil for at least 2 minutes before assembling. Ъ Use one spring. 30-88 WA250-3L