DISASSEMBLY AND ASSEMBLY TRANSMISSION CONTROL VALVE TRANSMISSION CONTROL VALVE REMOVAL WARNING! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. Remove the cover under the cab, the transmission inspection cover, and the side cover. For details, see REMOVAL OF TORQUE CONVERTER CHARGING PUMP ASSEMBLY. 1 . Draining oil Loosen drain valve (4) and drain transmission oil. Transmission oil: 35 R 1) Disconnect transmission solenoid connectors (5), (6), (7), and (8), and speedometer sensor connector (9) from transmission wiring.
Ъ If the connectors are removed, fit tags to distinguish the wiring. 2) Remove clamp (11) of transmission wiring (10), and disconnect torque converter oil temperature sensor connector (12). 2. Tube hose 1) Remove tube (13) between transmission and torque converter charging pump. 2) Disconnect hose (14) between torque converter oil filter and transmission valve, and hose (15) between oil cooler and transmission valve at transmission valve end. 3) Remove elbows (16) and (17). 3. Transmission valve Sling transmission valve (18), then remove mounting bolts and lower under chassis. WARNING! The working space is confined, so be extremely careful.
Ъ When fitting the lifting tool, avoid the connectors and fit the tool securely to the valve body. Transmission valve: 46 kg 30-90 WA250-3L