DISASSEMBLY AND ASSEMBLY DIFFERENTIAL 2. Coupling Install coupling (22), O-ring (23) and holder (21) to pinion gear (25), then tighten mounting bolts. Ъ Tighten the mounting bolts temporarily. Tighten them fully after the completion of assembly. Ъ When inserting the coupling, be careful not to damage the seal. Mounting bolt:: Adhesive (LT-2) Mounting bolt: 279.5 ± 29.4 Nm (28.5 ± 3.0 kgm) 3. Differential carrier assembly 1) Install side gear (18) and thrust washer (19) to differential carrier (12). Ъ Install thrust washer (19) correctly with the groove in the carrier (12).
2) Install pinion gear (17) and shaft (16) to differential carrier (12), then insert lock pin (15) Ъ Install a spherical washer at the pinion gear. Gears, shafts: Oil (axle oil) 3) Assemble side gear (14) and thrust washer (13). Sliding surface of thrust washer: Oil (axle oil) 4) Press fit bearing (11) on bevel gear (10). 30-118 WA250-3L