Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY STEERING VALVE 6. Remove drive shaft (7). 7. Remove spacer plate (8). 8. Remove O-ring (9) from housing (10). 9. Remove housing (10) from vice, and place on a clean cloth. Be careful not to damage the finished surface. 10. Raise tip of snap ring (11) with screwdriver, and remove from housing. 11. Turn spool and sleeve to place pin in a horizontal position, then push in spool and sleeve with your thumb, and remove bushing (12) from housing. 12. Remove X-ring seal (13) from bushing (12). 13. Remove dust seal (14) from bushing (12) with screwdriver. Ъ Be careful not to damage the bushing. 30-152 WA250-3L