DISASSEMBLY AND ASSEMBLY HYDRAULIC TANK HYDRAULIC TANK REMOVAL WARNING! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. ! Remove cover (1-1) at the top of the hydraulic tank. WARNING ! Loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Then operate the steering wheel and control levers several times to release the remaining pressure in the hydraulic piping. ! Loosen plug (1) at the top of the hydraulic tank filter to prevent the oil inside the hydraulic tank from flowing out. 1.
Remove R.H. ladder, fender, and cover assembly (2). 2. Disconnect hydraulic piping at hydraulic tank end. 1) Hose (3) between main control valve and hydraulic tank 2) Hose (4) between steering valve and hydraulic tank 3) Hose (5) between priority valve and hydraulic tank 4) Hose (6) between main control valve and hydraulic tank 5) Hose (7) between hydraulic pump and hydraulic tank Ъ Disconnect hose (7) when removing the hydraulic tank. 3. Sling hydraulic tank assembly (8) and remove mounting bolts (9). WARNING! Be careful to maintain the balance when slinging, and remove the bottom bolts first. 4. Disconnect hydraulic tank assembly from hose (7) while lifting off. Hydraulic tank :
71 kg (dry) 30-178 WA250-3L