DISASSEMBLY AND ASSEMBLY HYDRAULIC TANK INSTALLATION ! Carry out installation in the reverse order of removal. Clamp of hose (3): 3.3 ± 0.5 Nm (0.34 ± 0.05 kgm) Clamp of hose (7): 5.9 ± 0.5 Nm (0.60 ± 0.05 kgm) Hose (5): 24.5 ± 4.9 Nm (2.5 ± 0.5 kgm) (width across flats: 19 mm) Hose (4): 137.3 ± 29.4 Nm (14.0 ± 3.0 kgm) (width across flats: 32 mm) Hose (6): 196.1 ± 49.0 Nm (20.0 ± 5.0 kgm) (width across flats: 41 mm) Ъ Add hydraulic oil to the specified level. Ъ Run the engine to circulate the hydraulic oil through the system. Then check the oil level again. 30-179 WA250-3L