Komatsu — INSTALLATION

DISASSEMBLY AND ASSEMBLY HYDRAULIC FILTER HYDRAULIC FILTER REMOVAL WARNING! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. 1. Remove cover (1) at top of hydraulic tank. WARNING! Loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Then operate the steering wheel and control levers several times to release the remaining pressure in the hydraulic piping. ! Loosen plug (2) at the top of the hydraulic tank filter to prevent the oil inside the hydraulic tank from flowing out. 2.

Remove cover mounting bolts, then remove cover (3). WARNING! The cover is under the force of a spring, so be careful when removing it. Be careful not to damage the mating surface of the cover and tank and O-ring (4). 3. Remove filter, spring (5), and bypass valve (6), then remove filter (7). INSTALLATION ! Carry out installation in the reverse order of removal. Ъ Fit the O-ring securely in the groove and be careful not to get it caught. 30-180 WA250-3L