DISASSEMBLY AND ASSEMBLY HYDRAULIC CYLINDER 3. Set piston rod (8) to tool H. 4. Assemble cylinder head assembly (7) and piston assembly (6) to rod, then fit nut (5). 5. Using tool J, tighten nut (5). Rod thread: Thread tightener (LT-2) Piston nut: 6 . Remove piston rod and head assembly from tool H . 7 . Set cylinder (4) to tool H. 8. Raise piston rod and head assembly (3), and assemble to cylinder (4). 9. Using tool I , tighten cylinder head nut (2). Cylinder head nut: 10. Remove cylinder assembly (1) from tool H.
30-189 WA250-3L Cylinder Width across flats (mm) Tightening torque Nm (kgm) Boom cylinder 70 2598.8±259.9 (265±26.5) Bucket cylinder 80 3971.7±397.2 (405±40.5) Steering cylinder 36 411.9±41.2 (42±4.2) Cylinder Tightening Torque Nm (kgm) Boom cylinder 980.7±98 (100±10) Bucket cylinder 1029.7±103.0 (105±10.5) Steering cylinder 539.4±53.9 (55±5.5)