daewoo G20E-3, G25E-3, G30E-3 — Daewoo G20E-3, G25E-3, G30E-3 — спецификация (EN)

(2) Main jets have size symbols stamped on their ends for identification. Size symbols : 132.5 132.5 Size symbol 6EN0869 Weight B Check ball/weight installation Check ball Install the acceleration check ball and weight. After the float and float pin have been installed, make sure that the float is in a level position. C Float/float pin installation 6EN0856 • Strangler spring setting positions 3rd Stage Hole A Spring Setting Positions If the strangler spring of the choke valve shaft is out of position, set it correctly in the positions shown in the illustration. 2nd stage Hole B 1st stage Hole C 6EN0858 G424 Service Manual Gasoline Fuel System 70