TROUBLESHOOTING / Troubleshooting A T5-6-31 Presumptive Symptoms in Real Machine Operation Assumptive Conditions at Back-up Fault Code (Tech 2) Reference Page on Engine Trouble- shooting Manual Output lowering • Limited injection amount 2 (Multi-injection stopped) • Sub-CPU stops control. P0606 1E-377 Accelerator opening angle is controlled to 0 %.
Same to accelerator sensor fault P1631 1E-505 • Black smoke emitted at high altitude • Output lowest at low altitude • Same to barometric pres- sure and intake air temperature sensor fault P1632 1E-508 • Intense engine vibration • Rough idling • Output lowering • Blow up fault • Limited injection amount 3 (Multi-injection stopped) • Target rail pressure upper limit (80 MPa) P1094 1E-405 • Intense engine vibration • Rough idling • Output lowering • Blow up fault • Black smoke emission • Engine stall • Limited injection amount 3 (Multi-injection stopped) • Target rail pressure upper limit (80 MPa) P1093 1E-396 • Intense engine vibration • Rough idling • Output lowering • Blow up fault • Black smoke emission • Limited injection amount 3 (Multi-injection stopped) • Target rail pressure upper limit (80 MPa) P0091 1E-189 • Intense engine vibration • Rough idling • Output lowering • Blow up fault • Black smoke emission • PCV1 stop P0092 1E-195 • Intense engine vibration • Rough idling • Output lowering • Blow up fault • Black smoke emission • Limited injection amount 3 (Multi-injection stopped) • Target rail pressure upper limit (80 MPa) P1291 1E-189 • Intense engine vibration • Rough idling • Output lowering • Blow up fault • Black smoke emission • PCV2 stop P1292 1E-195 Engine does not start.
No back-up P1625 1E-496 • Operationality is not affected. • Instruction to fully close EGR valve P0487 1E-347 • Operationality is not affected. • Instruction to fully close EGR valve P0488 1E-353