hitachi — PREPARATION FOR PERFORMANCE TESTS

TROUBLESHOOTING / Troubleshooting B T5-7-8 Parts Solenoid Valve Unit (SG) Solenoid Valve Unit (SI) Solenoid Valve Unit (SF) Function • Temporarily increases relief pressure of main relief valve when operating power dig- ging and travel. • Controls travel mode selec- tion. • Shifts boom flow rate control valve (switch valve) during combined operation of boom lower and arm or bucket. (Boom flow rate control valve control) Symptoms in control sys- tem when trouble occurs. • If solenoid valve unit (SG) is not activated, pressure at port SG becomes 0 MPa (0 kgf/cm2). • As swash angle of travel mo- tor cannot be changed, travel motor is fixed at large swash angle position (slow speed).

• If solenoid valve unit (SF) is not activated, pressure at port SF becomes 0 MPa (0 kgf/cm2). Symptoms in machine operation when trouble occurs. Solenoid valve unit (SG) is closed: • Relief pressure stays at nor- mal 31.4 MPa (325 kfg/cm2). Even if power digging switch is pushed, relief pressure does not increase. Power does not increase. Solenoid valve unit (SG) is open: • Pressure always increases. Every operation makes power increase. • Even if travel mode switch is turned to FAST position, fast travel mode cannot be se- lected. • Arm speed is slow when op- erating boom lower and arm. • Bucket speed is slow when operating boom lower and bucket.

Evaluation By MC Fault Code Fault code 11404 is displayed. Fault code 11405 is displayed. Fault code 11402 is displayed. By Monitor Function Monitor Item: Main Relief Pressure Switch Valve Output Monitor Item: Travel Mode Control Pressure Monitor Item: Boom Flow Rate Control Valve Output Using Test Harness • Install lamp harness (ST 7130). Check output signals from MC and harness condi- tion. • Install lamp harness (ST 7130). Check output signals from MC and harness condi- tion. • Install lamp harness (ST 7130). Check output signals from MC and harness condi- tion. Others - - - NOTE - - - Descriptions of Control (Operational Principle Section in T/M) T2-1 T2-1 T2-1