TROUBLESHOOTING / Troubleshooting B E-6 Faulty E mode Even if power mode switch is turned to the E mode position, engine speed remains unchanged. (En- gine speed does not decrease.) In case trouble symptoms E-1 to E-5 and E-7 are recognized, perform the troubleshooting of these troubles first. The sensors detect the conditions necessary to operate E mode. Therefore, if any of these sen- sors fails, E mode becomes inoperable. Pump 1, 2 regulator pressure sensors and pump 1, 2 delivery pressure sensors are also engaged in the E mode control. However, if these sensors fail, other operating functions will be also af- fected.
Refer to the pages for E Mode Control in the SYSTEM / Control System group in the T/M (Op- erational Principle). Check the wiring connections first. NO Faulty power mode switch, or open circuit in harness between power mode switch and MC. Monitor power mode switch. When power mode switch is shifted to E mode, check if display is changed. NO Faulty MC. · Monitor item: EP mode switch YES Check if fault code is displayed. YES Refer to Troubleshooting.
T5-7-44 Related Fault Code Trouble Reference Page MC 11004 CAN Communication Error T5-6-28 11200 Abnormal Pump 1 Delivery Pressure Sensor T5-6-50 11202 Abnormal Pump 2 Delivery Pressure Sensor T5-6-51 11992 Abnormal Pump 2 Regulator Pressure Sensor T5-6-69 11994 Abnormal Pump 1 Regulator Pressure Sensor T5-6-71