hitachi — PREPARATION FOR PERFORMANCE TESTS

TROUBLESHOOTING / Troubleshooting B T-4 Fast travel is inoperable. Travel mode does not change from slow mode to fast mode. Reference Page T5-6-58 T5-6-68 MC T5-6-70 Refer to the pages for Travel Motor Swash Angle Control in SYSTEM / Control section in the T/M (Operational Principle). Check the wiring connections first. Faulty travel mode switch or open circuit in harness between travel mode switch and MC. NO Monitor travel mode switch. Check if displayed in- dication is highlighted in response to travel mode switch operation. Faulty travel motor swash angle control mechanism. Check if travel motor swash angle control mechanism is abnor- mal.

YES YES Monitor travel motor Speed Control Pres- sure. Check if pressure is approx. 3.9 MPa (40 kgf/cm 2 , 570 psi). · Monitor item: Travel mode · Possible to display by using built-in diagnos- ing system Faulty travel motor or faulty travel reduction gear. NO YES Faulty MC. · Monitor item: Travel motor control valve out · Possible to display by using built-in diagnos- ing system · Travel mode: Fast NO T5-7-81 Trouble 11405 Abnormal Solenoid Valve Unit (SI) 11991 Abnormal Right Travel Pilot Pressure Sensor 11993 Abnormal Left Travel Pilot Pressure Sensor