hitachi — PREPARATION FOR PERFORMANCE TESTS

OPERATIONAL PERFORMANCE TEST / Excavator Test SWING BEARING PLAY Summary: Measure the swing bearing play using a dial gauge to check the wear of bearing races and balls. Preparation: 1. Check swing bearing mounting bolts for loose- ness. 2. Check the lubrication of the swing bearing. Con- firm that bearing rotation is smooth and without noise. 3. Install a dial gauge on the track frame as shown by using a magnetic base. 4. Position the upperstructure so that the boom aligns with the tracks facing towards the front idlers. 5. Position the dial gauge so that its needle point comes into contact with the bottom face of the bearing outer race. 6. Bucket should be empty.

Dial Gauge Magnetic Base T105-06-03-014 NOTE: The measured value will vary depending on where the magnet base is secured. Secure the magnet base onto the round trunk or in a position as close to the round trunk as possible. Round Trunk T105-06-03-015 T4-4-9