hitachi — PREPARATION FOR PERFORMANCE TESTS

OPERATIONAL PERFORMANCE TEST / Excavator Test Measurement: 1. Position the front attachment as follows: Backhoe: With the arm cylinders fully retracted and the bucket cylinders fully extended, position the arm tip pin height is flush with the boom foot pin height. Loading shovel: With the arm cylinder fully extended and the bucket cylinders fully extended, position the arm top pin height is flush with the boom foot pin height. 2. Lower the bucket to the ground and use it to raise the front idler 0.5 m (20 in). Record the dial gauge reading (h 2 ). 3. Calculate bearing play (H) from this data (h 1 and h 2 ) as follows: H=h 2 h 1 Evaluation:

Refer to the Performance Standard Table in Group T4-2. Backhoe Front Measurement : (h 1 ) Measurement : (h 2 ) The height as the boom foot pin height T105-06-03-017 Measurement : (h 2 ) T105-06-03-013 Loading Shovel Front Measurement : (h 1 ) TBAR-04-04-001 TBAR-04-04-002 T4-4-10 The height as the boom foot pin height