SERVICE ENGINE 2. Clean air intake screen on top of engine and external surfaces with rag, brush, vacuum or compressed air. 6. Inspect the paper filter element (D) without removing it. If the paper filter element is damaged or dirty: Carefully remove the element from the air cleaner housing. Checking and Cleaning Air Cleaner Elements (Single Cylinder Briggs & Stratton) 7. Clean air cleaner base very carefully, preventing any dirt from falling into carburetor. 1. Park machine safely. (See Parking Safely in the SAFETY section.) 8. Install new paper filter element. 2. Let engine cool. 9. Install foam precleaner on paper filter element. 3. Clean dirt and debris from the air cleaner cover. 10.
Install air cleaner cover and push latch down to lock. Checking and Cleaning Air Cleaner Elements (Twin Cylinder Briggs & Stratton) 1. Park machine safely. (See Parking Safely in the SAFETY section.) MX7679 5. Do not drop anything into the carburetor air intake (C). If anything falls into the carburetor air intake it must be removed. 5. Inspect the foam precleaner (C) without removing it. If the foam precleaner is dirty: 6. Lift out filter cartridge (D) and inspect it for damage. a.Remove it from the filter carefully, leaving the paper element (D) in the air cleaner housing. b.Wash precleaner in a solution of warm water and liquid detergent. Do not use oil. c.Rinse precleaner thoroughly.
Squeeze out excess water in a dry cloth until precleaner is completely dry. Service Engine - 23 A B MX76 4. Lift latch (A) to unlock cover (B). Lift cover forward and remove. A B Clean dirt and debris from the air cleaner cover. B A A MX3793 Loosen four knobs (A) and remove cover (B). oosen four knobs (A) and remove cover (B). I a M PORTANT: Avoid damage! To prevent engine damage, do not ll ow any foreign objects to fall into the carburetor air intake. D C E M9609 IMPORTANT: Avoid damage! Dirt and debris can enter the engine through a damaged filter element: • Do not wash paper element. • Do not attempt to clean paper element by tapping against another object.
• Do not use pressurized air to clean element. • Replace element only if it is very dirty, damaged or the seal is cracked. C D B