Lubrication and Service - Section 40 10/09 OM4057 Page 40-10 500 HOUR LUBRICATION AND MAINTENANCE CHECKS All 10 Hour (Daily) Inspections and 250 Hour Lubrication and Maintenance Checks should also be performed at this time. NOTE: “Lube Key” references are to the Lubrication Chart on page 40-3. 1. 2. 3. 4. 5. 6. Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS HYDRAULIC SYSTEM FILTERS - Replace the hydraulic tank breathers and high pressure filter elements. Check the oil level. Add oil as necessary.
(Lube Key “B”) HYDRAIR® SUSPENSION - Check for proper piston extension (front and rear). THROTTLE AND BRAKE PEDAL - Lubricate the treadle roller and hinge pins with lubricating oil. Lift the boot from the mounting plate and apply a few drops of lubricating oil between the mounting plate and the plunger. HOIST LEVER LINKAGE - Check the lever operation. Clean, lubricate and adjust the linkage as necessary. PARKING BRAKE - Refer to the shop manual for the recommended inspections. RESERVE ENGINE OIL SYSTEM - 1. Check the electrical system connections for tightness, corrosion and damage. Check the battery, oil pressure switch, junction boxes, remote control box and the circuit breakers. 2.
Examine all electrical cables over their entire length for possible damage. 3. Inspect all reserve engine oil system hoses for leaks, cracks or other damage. Check all fittings for tightness, leakage or damage.