OM4057 10/09 Lubrication and Service - Section 40 Page 40-11 500 HOUR LUBRICATION AND MAINTENANCE (Cont.) 7. 8. 9. 10. 11. BLADDER ACCUMULATORS - Check the precharge pressure. Failure to maintain the correct precharge pressure may result in bladder failures. VHMS DATA DOWNLOAD - Perform a data download from the VHMS controller and send the data to WebCARE. Refer to the shop manual for more detailed instructions. GRID BLOWER SHAFT BEARINGS - Add one or two applications of grease to each grease fitting. Ensure that each bearing is receiving grease. Replace bearings if any wear is detected.
(Lube Key G) CONTROL CABINET COOLANT - Check the coolant level of the drive system controller inside the control cabinet. Coolant must be visible in the middle of the upper sight gauge. FRAME AND AXLE BOX INSPECTION - Wash the truck, clean all of the weld joints, and visually inspect the entire frame and axle box for cracking or damage.