Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DAMPER CASE, CLEAN DAMPER BREATHER WARNING (F)Front of the machine 4 - 83 The oi l is a t high temperat ure immediately after the machine ha s been operated.Wait for the oil to co ol down before carrying out maintenance . The undercover i s heavy. D o not go directly under t he cover whe n opening or closing it. When removin g bolts (4), carry out the operation a t the rear of the point im mediately unde r the cover s o that it is possible to escape at any t ime. Refill capacity: 1.5 liters (0.40 U S gal) 1. Ope n th e engine side cover (1) at the left of the machine; you 2.

Remove the u ndercov er (2) at t he bottom rea r of the cha ssis as follows. 1) Remove 2 bolts (3) toward the front of the chassis. 2) Hold down cover and gradually remove 2 bolts (4) at the machine rear end. (Rainwater or other accumulated water may flow out, so be careful.) follows. 1) Remove 2 bolts (3 ) toward the front of th e chassis. Hold dow machine r n cover ear end. and grad (Rainwa ually r ter or emove other a 2 bolts (4) ccumulated at the water may flow out, so b e careful .)