Section 0 - Engine Disassembly and Assembly - Group 00 Engine Assembly (0-02) M11 Page 0-127 Use a new gasket and install the air compressor using four capscrews (7/16 - 14 x 1 7/8 inch) and two nuts (7/16 x 14). Torque Value: 65 [50 ft-lb] Install the coolant inlet hose on the air compressor fitting (5) and tighten. Torque Value: 40 [30 ft-lb] Air Compressor Air Supply Tube - Installation Install the o-ring on the air supply tube. Use vegetable oil to lubricate the o-ring. Install a new hose (1) and two new hose clamps 1-3/4 inch (2) on the tube. Use one capscrew (M10-1.50 x 20) to install the tube into the side of the cylinder head at location (3). Torque Value:
47 [35 ft-lb] Install the hose (1) on the air compressor air supply con- nection. Tighten the hose clamps (2). Torque Value: 5 [40 in-lb]