Delphi — Check Cylinder Head Flatness

Cylinder Head and Valves 7. Final dry fuel rail passages with clean lint-free cloth and rifle cleaner or suitable push rod. 8. Coat new expansion plug with LOCTITE 277 Plastic Gasket and install in front face of head. 02 020 30 LOCTITE is a registered trademark of Loctite Corp. RG,RG34710,80 –19–03SEP02–2/2 Check Cylinder Head Flatness Check cylinder head flatness using D05012ST Precision Straightedge and feeler gauge. Check lengthwise, crosswise, and diagonally in several places. Specification Cylinder Head—Maximum Acceptable Out-of-Flat for Entire Length of Head 0.10 mm (0.004 in.) ...........................................................

Maximum Acceptable Out-of-Flat for Every 305 mm (12.0 in.) 0.025 mm (0.0009 in.) ................................... RG8309 –UN–21MAY98 If out-of-flat exceeds specifications, the cylinder head must be resurfaced or replaced. (See MEASURE CYLINDER HEAD THICKNESS later in this group.) Measuring Cylinder Head Flatness RG,RG34710,81 –19–30SEP97–1/1 CTM100 (06APR04) 02-020-30 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=102