Delphi — Measure Cylinder Head Thickness

Cylinder Head and Valves Measure Cylinder Head Thickness Measure cylinder head thickness from rocker cavity-to-combustion face. If cylinder head thickness is less than wear limit, DO NOT attempt to resurface. Install a new cylinder head. 02 020 31 RG8324 –UN–21MAY98 If cylinder head thickness is greater than wear limit, a MAXIMUM of 0.15 mm (0.006 in.) can be ground from new part dimension for a minimum overall thickness. (See RESURFACE CYLINDER HEAD COMBUSTION FACE, later in this group.) Using Depth Gauge Specification Cylinder Head (Rocker Arm Cover-to-Combustion Face)— New Part Thickness 124.975—125.025 mm (4.9203—4.9222 in.) ..............................................

Minimum Acceptable Thickness 124.840 mm (4.9150 in.) ......................... RG8325 –UN–21MAY98 Measuring Cylinder Head Thickness RG,RG34710,82 –19–30SEP97–1/1 CTM100 (06APR04) 02-020-31 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=103