Delphi — Resurface Cylinder Head Combustion Face

Cylinder Head and Valves Resurface Cylinder Head Combustion Face IMPORTANT: DO NOT grind cylinder head combustion face or block top deck. Surface mill only. 02 020 32 After surface milling, check flatness (see CHECK CYLINDER HEAD FLATNESS in this group). Check surface finish on combustion face of head. Measure valve height (recess) after grinding. (See CHECK VALVE HEIGHT IN RELATION TO HEAD SURFACE earlier in this group.) Valve seat or valve face may be ground to bring within specifications. NOTE: If necessary to resurface cylinder head, a MAXIMUM of 0.15 mm (0.006 in.) can be milled from minimum new part dimension. Remove ONLY what is necessary to restore flatness.

Specification Cylinder Head (Rocker Arm Cavity-to-Combustion Face)— Minimum Overall Thickness 124.840 mm (4.9150 in.) ............................... Cylinder Head Combustion Face Surface Finish (Surface Mill Only) (AA)—Surface Finish 1.5—2.8 micrometers (60—110 micro-in.) ................................ Cylinder Head—Maximum Wave Height 0.008 micrometers (0.0002 micro-in.) .............................................................. Maximum Wave Width 2.0 micrometers (79 micro-in.) ............................... RG,RG34710,83 –19–30SEP97–1/1 CTM100 (06APR04) 02-020-32 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=104