Cylinder Head and Valves Measure Valve Seat Bore in Cylinder Head 1. Measure valve seat bores in cylinder head and compare with specifications given below. Specification Intake and Exhaust Valve Seat Bore—ID 49.424 ± 0.013 mm (1.9458 ± 0.0005 in.) ..................................................... 02 020 37 RG8315 –UN–21MAY98 Bore Depth 11.50 mm (0.443 in.) ............................................................... Radius at Lower Bore 0.64 ± 0.25 mm (0.025 ± 0.001 in.) .............................. Standard Intake and Exhaust Valve Seat—OD 49.487—49.513 mm (1.9483—1.9493 in.) ........................................................ Measuring Valve Seat Bore 2.
If valve seat bores are not within specification, oversize seat inserts are available. Have a qualified machine shop bore the valve seat to specification for installation of oversize valve seat inserts. (See INSTALL VALVE SEAT INSERTS, later in this group.) RG,RG34710,89 –19–13AUG99–1/1 CTM100 (06APR04) 02-020-37 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=109