Delphi — Install Rocker Arm Assembly

IMPORTANT: Later 12.5 L engines S.N. (30000— ) use different rocker arm assembly parts. Refer to parts catalog for correct applications. 2. With rocker arms properly spaced on shaft and cap screws (B) and (C) on each end, install JDG970A Rocker Arm Assembly Lifting Fixture (A) onto rocker arm and shaft assembly. RG8304 –UN–06DEC97 3. Firmly depress buttons on two lifting arms, install lifting plate with two locator pins and lifting arms positioned in holes of rocker arm shaft. Release buttons so that ball actuating pins lock onto shaft and can be safely lifted. Lifting Rocker Arm Assembly A—JDG970A Rocker Arm Lifting Fixture B—Cap Screw C—Cap Screw IMPORTANT:

ALWAYS loosen all intake, exhaust and EUI rocker arm adjusting screws before removal or installation of rocker arm assembly to relieve pressure. This allows for a more uniform rocker arm cap screw clamp load and reduces the possibility of damage to valve train components. 4. Install front and rear rocker arm and shaft assembly onto locating roll pins of cylinder head. Make sure all push rods are aligned properly. CTM100 (06APR04) 02-020-61 P OWER T ECH 10.5 L & 12.5 L Diesel Engines Continued on next page RG,RG34710,97 –19–01NOV00–2/9 040604 PN=133 Cylinder Head and Valves Install Rocker Arm Assembly 1. Make sure crankshaft and camshaft are locked at No.

1 cylinder TDC with timing pins (A) installed. A—Timing Pin –UN–05DEC97 RG8227A Timing Pin in Crankshaft RG,RG34710,97 –19–01NOV00–1/9 02 020 61