Cylinder Head and Valves Torque-Turn Rocker Arm Hold-Down Clamp Cap Screws on Engines with Dual Rail Fuel Systems 1. After applying initial torque of 30 (22 lb-ft), start at front cap screw and proceed to the rear and torque-turn each cap screw 60 ° ± 5 ° as follows: 02 020 63 Position a six point socket onto rocker arm shaft clamp cap screw. With clockwise tension on socket (viewed from rear of engine), mark a line (A) on socket and another aligning mark on shaft clamp (B) [or spacers (C) at each end location)].
RG9200A –UN–30JUL99 Torque-Turn Clamp Cap Screws A—Line on Socket B—Line on Shaft Clamp C—Line on Spacer RG9202A –UN–30JUL99 Torque-Turn Clamp Cap Screws Continued on next page RG,RG34710,97 –19–01NOV00–4/9 CTM100 (06APR04) 02-020-63 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=135